list grid
   
for gun
 
10.49€
72 Available
with applicator
 
9.99€
34 Available
   
Avotteksts


Uglovaya nasadka Rolynor dlya napyleniya primenyayetsya pri uteplenii gorizontal'nykh poverkhnostey — polov ili potolkov. Aksessuar krepitsya na konchik montazhnogo pistoleta i izmenyayet napravleniye raspyleniya penopoliuretanovogo uteplitelya. Eto pozvolyayet ne naklonyat' ballon s penoy i ostavlyat' yego v polozhenii «dnom vverkh». Plastikovaya nasadka, izmenyaya ugol raspyleniya na 90°, pozvolyayet nanesti sostav bez vykhoda gaza-vytesnitelya, sokhranyaya pravil'noye polozheniye ballona. Osobennosti Uglovaya nasadka izgotavlivayetsya iz plastika. Prednaznachena dlya primeneniya s firmennymi ballonami Rolynor. Ispol'zuyetsya pri uteplenii trudnodostupnykh mest, potolkov i polov snizu. Posle okonchaniya raboty promyvayetsya vmeste s montazhnym pistoletom
Rādīt vairāk
736 / 5 000
Tulkošanas rezultāti
The Polynor corner nozzle for spraying is used when insulating horizontal surfaces - floors or ceilings. The accessory is attached to the tip of the mounting gun and changes the direction of spraying polyurethane foam insulation. This allows you not to tilt the foam bottle and leave it in the “bottom up” position. The plastic nozzle, changing the spray angle by 90°, allows you to apply the composition without the release of propellant gas, while maintaining the correct position of the container.
-
 
4.99€
pre-order
   
Depron Heat and sound/noise insulation
Depron G / 3-GP
Size: 1.25 m x 0.80 m
High-quality heat and sound insulation boards for professional wall and ceiling insulation. A good system, especially for rooms damaged by moisture.
- Excellent insulation properties
- Protects against moisture, reduces water vapor
- 2 types of boards: with a special coating that ensures good subsequent wallpaper sticking and without coating
- thickness 3 mm and 6 mm
- suitable as heat and sound insulation under laminate, finished parquet, pressed chips.
3 mm GP
 
3.99€
199 Available
6 mm GP
 
5.55€
186 Available
   
Art. 6708
1m x 0.5m x 7mm

Extruded rigid polystyrene in the form of coated plates to facilitate adhesion to other materials.
PUFAS pufatherm Insulation boards are used as internal thermal insulation and are effective moisture protection for walls and ceilings. An ideal solution for problematic surfaces subject to damage caused by mold condensation.

- accelerate the heating of air in the room and maintain the temperature

- do not absorb water, do not get wet, odorless

- reduce water vapor transmission, protect walls and ceilings from moisture

- resistant to cement, lime, gypsum, alkali, protrusion of salts and almost all water substances (not resistant to organic solvents)

- do not rot, do not mold, do not create a nutrient medium for mold

- for sanitation of surfaces damaged by condensate and mold
7 mm x 0.5 kv.m
 
2.99€
173 Available
   
100cm x 50cm x 3mm / 5mm

Underlay for all types of floors (laminated boards, three-layer boards);
Made from extruded polystyrene foam XPS;
Ideal sound insulation;
Improve room acoustics;
Can be used on heated floors.;
1 m² = 2 boards (100x50 cm)
3mm 5 m² (10 p.)
 
4.99€
265 Available
5mm 5 m² (10 p.)
 
5.99€
180 Available
   
Available in 3 sizes
Length x Width

3mm/5m x 0.5m
3mm/10m x 0.5m
6mm/10m x 0.5m

Material density - 15 kg/m³.
Thermal conductivity coefficient - 0.039 W/(mk).
With aluminum foil

3mm/5m x 0.5m = 2.5m²
 
6.79€
15 Available
3mm/10m x 0.5m = 5m²
 
12.99€
7 Available
6mm/10m x 0.5m = 5m²
 
14.41€
6 Available
   
Insulation with cardboard
Available in 2 sizes
Length x Width
3mm /10m x 0.5m
6mm /10m x 0.5m

Material: EPS / polystyrene foam
Surface: paper layer
Density: approx. 45 kg/m³
3mm /10m x 0.5m = 5m²
 
8.23€
pre-order
6mm /10m x 0.5m = 5m²
 
12.45€
2 Available
   
10 x 0.5 m x 4 mm


laminated with cardboard
moisture isolating
Covering cracks
Temperature resistance: 75 ° C
Free from solvents and CFCs, environmentally friendly
Gross density: 14 kg / m3
Adhesive consumption: approx. 250-500 g / m²

Areas of application:

smooth surface as wallpaper
Compensation of unevenness and covering of cracks
Reduction of heat loss by up to 15% (in relation to an uninsulated, 24 cm thick brick masonry)
easy and quick attachment with the styrofoam adhesive

-
 
5.99€
21 Available
   
10 x 0.5 m x 4 mm


laminated with cardboard
moisture isolating
Covering cracks
Temperature resistance: 75 ° C
Free from solvents and CFCs, environmentally friendly
Gross density: 14 kg / m3
Adhesive consumption: approx. 250-500 g / m²

Areas of application:

smooth surface as wallpaper
Compensation of unevenness and covering of cracks
Reduction of heat loss by up to 15% (in relation to an uninsulated, 24 cm thick brick masonry)
easy and quick attachment with the styrofoam adhesive

-
 
8.99€
9 Available
   
5 x 0.5 m x 4 mm = 2.5 m2


Thermal insulation and impact sound insulation
Decorative in every ambience
Hard wearing and robust
Easy-care
Gluing with cork glue
easy attachment

Areas of application:

Cork for impact sound and thermal insulation
easy and quick attachment with cork glue
-
 
31.99€
6 Available
   
5 x 0.5 m x 4 mm

2.5 m2
heat reflective aluminum foil
Covering cracks
Temperature resistance: 75 ° C
Free of solvents and CFCs, environmentally friendly
Gross density: 14 kg / m3
Adhesive consumption: approx. 250-500 g / m²

Areas of application:

Cold insulation and reflection of the heat given off by the radiator by up to 95% into the living space
Reduction of heat loss by up to 15% (in relation to an uninsulated, 24 cm thick brick masonry)
rapid heating of the rooms
individually cut to size
easy and quick attachment with the styrofoam adhesive

-
 
8.29€
7 Available
   
4m 40x20mm
 
1.99€
pre-order
6m 30x20mm
 
1.99€
pre-order
8m 20x20mm
 
1.99€
pre-order
10m 8x10mm
 
1.99€
pre-order